Additional Information |
N/A
Versatility for On-Off and Open-Close Applications Unlike many differential removable/repositionable tapes, 3M™ Removable Repositionable Tape 666 features a permanent medium tack 3M™ Acrylic Adhesive 400 on the liner side and 3M™ Repositionable Acrylic Adhesive 1070 on the face side. Adhesive 400 has good Temperature performance and peel strength and is ideal for bonding together a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints and many plastics. Adhesive 1070 holds well to many surfaces and provides clean removal without adhesive residue or delamination. The UPVC film carrier improves the handling and strength of the tape and provides dimensional stability. Together with a low density polyethylene liner, this all-plastic tape construction is excellent for die cutting and laminating, as well as the ability to handle hot wire cutting. Recommended Applications
3M™ Acrylic Adhesive 400 is a medium-firm pressure sensitive acrylic adhesive system. It features an excellent balance of good initial adhesion (quick stick) and good shear holding power. This formulation gives 3M™ Adhesive 400 a consistently strong bond, high Temperature performance (up to 250ºF/121ºC) and good peel strength on many surfaces. 3M™ Repositionable Acrylic Adhesive 1070 is a medium tack adhesive used on the face side to provide a secure, temporary seal. The adhesive allows you to remove and reposition or replace the joined surfaces as needed and features clean removal from many oils, films and other surfaces without leaving adhesive residue. What is Double Coated Tape? In general, double coated tape is composed of a paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in construction, fabrication, arts, and hobby. Bringing Better Ideas to the Surface through Science and Innovation In our 3M™ Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently. |
3M ID (Stock Number) |
N/A 7000048460 7010295174 7010334866 7010535950 7100071111 7100113615 |
Legacy (Stock Number) |
N/A 70000017700 70006055381 70006055407 70006178035 70006405776 CY998787121 |
Sales UPC |
N/A 00021200143908 00021200143922 00021200244476 00048011584188 |
Country of Origin |
N/A USA |
ECCN Number |
N/A EAR99 |
Product Details |
N/A 3M™ Removable Repositionable Tape 666, Clear, 108 yds, 3.8 mil, Roll 3M™ Removable Repositionable Tape 666, Clear, 3.8 mil, Roll, Configurable 3M™ Removable Repositionable Tape 666, Clear, 72 yds, 3.8 mil, 1 Roll Per Case 3M™ Removable Repositionable Tape 666, Clear, 72 yds, 3.8 mil, 36 Rolls Per Case 3M™ Removable Repositionable Tape 666, Clear, 72 yds, 3.8 mil, 72 Rolls Per Case 3M™ Removable Repositionable Tape 666, Clear, 72 yds, 3.8 mil, 8 Rolls Per Case |
EU REACH |
N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019. |
EU RoHS |
N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP. |
Features |
N/A
|
