Additional Information |
N/A
Made for Die-Cutting 3M™ Double Coated Tape 9578 is a 4.0 mil double coated tape constructed on a hand-tearable translucent polypropylene carrier coated on both sides with 3M™ Adhesive 400. The thin, tough, polypropylene carrier between the adhesive layers improves the handling and strength of the tape. A hard, smooth 54 lb. densified kraft Paper release liner provides reliable performance for industrial applications like die-cutting and automated dispensers. It works exceptionally well in low Temperatures, with an operating range of -60º to 250ºF (-51ºC to 121ºC). It provides medium adhesion to metals, HSE and LSE plastics, and foam, and shows medium resistance to chemical environments. It also stands up well to humidity. Recommended Applications
3M™ Adhesive 400 is a medium-firm pressure sensitive acrylic adhesive system. It features an excellent balance of good initial adhesion (quick stick) and good shear holding power. Shear strength is the measure of pull force directed across the bonded surface, forcing the two surfaces to slide over each other. Bringing Better Ideas to the Surface through Science and Innovation In our 3M™ Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently. |
3M ID (Stock Number) |
N/A 7100012782 |
Legacy (Stock Number) |
N/A 70000082183 |
Country of Origin |
N/A USA |
ECCN Number |
N/A EAR99 |
EU REACH |
N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019. |
EU RoHS |
N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP. |
