3M™ Sandblast Stencil - Hand Cut Splice Free 510 is a general-purpose sandblast stencil for hand-cut and die-cut operations. The green rubber backing helps prevent stretching and design distortion, and offers easy alignment and blast-through. Rubber adhesive delivers a reliable bond to most surfaces and removes cleanly.
Unit of Measure
Additional Information |
N/A
Features Thick Rubber Backing 3M™ Sandblast Stencil - Hand Cut Splice Free 510 is a green, rubber-backed sandblast stencil with a rubber-based adhesive and clear polyester, film high release liner that ensures ease of use, processing and application. Ideal for die-cutting and hand-cut stenciling. Its rubber tape backing helps prevent stretching and design distortion, and offers easy alignment and blast-through. Our sandblast stencil products have the rubber backing thickness necessary to withstand the heavy blasting used to create crisp, deep images in granite, marble and other stone surfaces. The versatile rubber adhesive is excellent for a variety of surfaces yet still removes cleanly from a variety of surfaces in one piece for faster, easier cleanup. 3M™ Sandblast Stencil - Hand Cut Splice Free 510 is mounted on a clear polyester high release liner for excellent die-cutting capabilities. This product is used in a variety of application methods including hand-cut, die-cut, flatbed and friction fed. Recommended Applications
The stone surface should be clean, dry and at a room Temperature of 50º to 85ºF (10º to 29ºC) before applying the filler. Brush the well mixed filler evenly onto the stone surface. Let dry in a well-ventilated area until the "gloss" on the surface has disappeared. Then apply the stencil according to directions. After blasting, remove the stencil as soon as possible. If any cleanup is necessary, use stencil scraps or masking tape to pull leftover filler from the stone. Use 3M™ Sandblast Filler #2 to help increase adhesion and to hold the stencil to polished stone surfaces. Use 3M™ Sandblast Filler #3 for rough and irregular surfaces. Smart Solutions through Science and Innovation The 3M™ Industrial Adhesives and Tapes Division is changing the way companies around the world mask, protect, splice, color code and stop moisture. These technologies help customers deliver competitive products to the market with speed and efficiency. The 3M™ Sandblast Stencil - Hand-Cut Splice Free 510 is just one example of how 3M™ is bringing better ideas to the surface through science and innovation. |
3M ID (Stock Number) |
N/A 7000028968 7000048885 7000048886 7000123347 7010374326 7100012344 |
Legacy (Stock Number) |
N/A 70000027378 70006074093 70006287083 70006287091 70006287109 70006653730 |
Sales UPC |
N/A 00021200184338 00021200447457 00021200447464 00021200447471 00051111072660 |
Country of Origin |
N/A USA |
ECCN Number |
N/A EAR99 |
Product Details |
N/A 3M™ Sandblast Stencil Hand-Cut Splice Free 510, Green, 10 yds, 45 mil, 1 Roll Per Case 3M™ Sandblast Stencil Hand-cut Splice Free 510, Green, 100 yds, 45 mil, 1 Roll Per Case 3M™ Sandblast Stencil Hand-Cut Splice Free 510, Green, 45 mil, Roll, Configurable |
EU REACH |
N/A This product, including any article that the product is composed of, does not contain at greater than 0.1% by weight a Substance of Very High Concern (SVHC) substance identified according to Article 59 of REACH. This declaration reflects the substances on the candidate SVHC list, effective July 2019. |
EU RoHS |
N/A This product does not exceed the maximum concentration values (MCVs) for phthalates set under EU Directive 2011/65/EU (RoHS recast/RoHS 2), as amended by EU 2015/863, which applies to finished EEE after July 22, 2019 for Category 1-7, 10-11 products and after July 22, 2021 for Category 8 and 9 products. This means that each of the homogeneous materials within this product does not exceed the MCV of 0.1% (by weight) for each of the following phthalates: DEHP, BBP, DBP, and DIBP. |
Features |
N/A
|
